What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 30.06.2025 01:01
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
An AC voltage/ current source, and an ac inductive load.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Unreleased GeForce RTX 3080 Ti with 20GB memory spotted on eBay - VideoCardz.com
The MOV will conduct when the voltage exceeds 50% of line voltage.
so, what happens?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Pacers defeat Knicks in 6 games, advance to NBA Finals to face Thunder - NBC News
Now when you have a certain ac resistance, then a current flows in a loop.
He then asserts :
A fuse is a non-resetable over current circuit protector.
The Full ‘Squid Game’ Season 3 Trailer Teases a Wild and Violent End - Gizmodo
At least they know the answer if they wanted it.
A circuit breaker is similar, but is resettable.
the problem then depends on "how fast does the fuse operate?".
See how the national debt grew to more than $36 trillion - The Washington Post
What does a fuse do?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
a photo is worth a thousand words.
Term Sheet Next: SV Angel alum Steven Lee debuts Seven Stars with $40 million first fund - Fortune
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
There are two important concepts here.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
'Real Housewives' Exec Dies During Childbirth and Stars Are Showing Support - AOL.com
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Edit 2024–10.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
New study finds strong link between hearing loss and dementia - WKRC
2024–10–16 [ OO OLAOYE OYEBODE ]
Here is a simplified AC power diagram.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Looks Like Ye and Bianca Censori Are Going Strong - The Cut
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
He then describes Rainy Season and Lightning.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Astronauts Reveal The Shocking Beauty of Lightning From Space - ScienceAlert
eight
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
These devices are installed between the “hot” and “neutral” and protective ground.
It also is a device that limits the change in current flow.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
what exactly is a ‘surge’ protector?
Is it possible to use AI to help with interview questions?
but I think this circuit , shows a few more pieces.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
One
2025 Trade Deadline Outlook Series - MLB Trade Rumors
This device then solves the entire problem.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
First Sentence:
CBS Sports and Pac-12 extend partnership through the 2030-31 season - Pac-12 Conference
I post the exact comment here.
But it can get overloaded, and no longer works.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
These are simplified answers to the original question, and does not change anything I wrote above.
[old diagram got deleted by accident]
For this case there are devices called Metal oxide varistors (MOV).
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
One is “what exactly is in a ‘surge protector’ ? ”
At one ohm, the resistor has a maximum of 1 watt power.
Because the load is inductive, the current lags the voltage.(by a bit).
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Barnstars:
There are three different concepts here that are getting confused.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
(Dc diagram shown, AC is similar).
It seems Mohan does not understand the difference between a comment and an Answer.
but this device (an Inductor) … impedes the rapid changes in the current.
This is 'the assistant's answer'
The third is lightning and “how it gets conducted into a home.”
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
In schematic diagrams this is the symbol for a fuse:
What is lightning?
nine
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This one hit behind the barn.
But… the neutral is now “floating” because of the 1 ohm resistance.
He then describes the function of a fuse.
This is where the MOV conducts again, and dissipated the energy.
Upvotes:
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2024–10–10[John johnson John Johnson ]
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The bolt then partially travels down the line to your home.
[image of Common-mode choke]
This is where this question deviates from being a 'generic' question, and becomes more specific.
The other is “what does a “fuse” do?”